A．垂直架構：   為厚3mm，60x40mm鋼管焊制成型。
B．前橫梁：     為厚2.3mm，鋼板機制成型，以螺絲或拉釘固定于垂直架構。
C．后橫梁：     為厚1.6mm，鋼板機制成型，以螺絲或拉釘固定于垂直架構。
D．下橫梁：     為厚2.3mm，鋼板機制成型，以螺絲或拉釘固定于垂直架構。
E．調整腳：     為4分螺桿制，下襯防水防銹底座。
F．臺面：       臺面采用13mm理化板專用實驗室臺面.
G. 管道槽：     采用18mm防潮板。
H. 插座：       電源插座采用220V插座，約每一公尺設置一組插座。（如須110V事先說明）。
I. 門板：       門板采用18mm防潮板，并以3mm 聚氯乙烯封邊防水處理。

K. 滑軌：       抽屜兩側滑軌采用鋼制烤漆處理，采用鋼制載重型三節滑軌裝置。
L. 抽屜底板：   抽屜底板采用4mm麗光板制作。
M. 把手：       采用SUSㄇ字型實驗室專用把手。
N. 鉸鏈說明：　 采用實驗室專用鉸鏈。
O．化驗水槽：   采用6mm厚聚氯乙烯制作,耐酸堿一體成型水槽。
P．化驗龍頭：   采用銅質并經耐酸堿烤漆處理之立式三口化驗龍頭，上方一口可360度旋轉，出水口為聚氯乙烯材質，除具有緩壓作用外，并可拆卸清  洗以免阻塞，整體化驗龍頭須經防酸堿及防銹之表面處理。 
Q．落水頭 ：    采用提籠式過濾落水頭，具有堵臭及防止水管阻塞的功能，并易手拆卸保養。（末端加置聚氯乙烯三元件，兩層防護）。
R. 藥品架架體說明： 鋼龍骨。
S. 藥品架層板說明： 層板采用6mm鋼化玻璃。
Steel wood central table material description
A. The vertical architecture: thick 3mm, 60x40mm steel pipe welding molding.
B. The front cross member: thick 2.3mm steel, the mechanism of forming, with screws or screws fixed on the vertical structure.
C beam: thick 1.6mm steel, the mechanism of forming, with screws or screws fixed on the vertical structure.
D. 2.3mm: the thick steel plate beam, the mechanism of forming, with screws or nails are fixed on the vertical structure.
E. Adjust the foot: 4 screw system, lower lining waterproof anti-rust base.
F. Table: table uses the 13mm physicochemical board special laboratory table.
G. A pipe slot: using 18mm moisture-proof plate.
H: using 220V socket socket outlet, about every meter is provided with a set of socket. ( if 110V prior instructions ).
I: 18mm door door board, and 3mm PVC sealing waterproof processing.
K: both sides of the drawer slide rail with steel paint treatment, the use of steel heavy load three slide device.
The drawer bottom drawer bottom: L by 4mm Li plate production.
M: using SUS text font handle laboratory special handle.
N Description: the use of laboratory dedicated hinge hinge.
O. Laboratory flume: employs 6mm thick PVC production, acid and alkali resistance integrally molded sink.
P. Laboratory Faucet: made of copper and the acid and alkali resistant paint treatment of vertical three laboratory faucet, just above the mouth can be rotated 360 degrees, an outlet for PVC material, in addition to a slow compression, and a detachable cleaning wash so as not to block the whole test, leading by alkali and rust-proof surface treatment.
Q. Falling head : the use of cage type filtering water falling head, with odor blocking and prevent the water pipe blocking function, and easy disassembly and maintenance. (the end of the PVC three elements, two layer protection ).
R drug rack body: steel keel.
S. Drug shelf plate: plate using 6mm tempered glass.